Monday 18 February 2013

On larp archery - packing your arrows in the quiver.

As I mentioned in the larp quiver guide this post is about packing your arrows. Someone might ask, ok so what's so difficult about packing your boffer arrows in the quiver? Well for once they are boffer arrows - they have a big foam head on the front. That's why most people simply load the arrows upside down in their quivers, like this.


Which is well and good, however when it comes to shooting, you have to turn each arrow upside down before firing, which cuts your ability to shoot fast. One way to solve this is by learning how to hold several arrows in your hand like I did, fire in volleys and then hide behind your line to reload.

The other is to fix the obvious problem with boffer arrows and quivers - the arrows being upside down.
If they are not, you can shoot much faster since every arrow you draw is ready for nocking.
Unfortunately you can't just stuff your arrows in the other way. They will get tangled with one another because of the boffer heads and you are likely to spill half your ammo if you try to pull one out. However, that problem is not without cure. The cure is to carefully arrange your arrows. In the quiver guide I mentioned that I closed the quiver with a single seam instead of sewing a bottom to it for a reason.

Here is the reason. The bottom of my quiver is exact fit for 3 larp arrows. No more, no less, no room for wiggling and tangling.


So once we load it up those 3 arrows can't get tangled and spill out. OK you'll say, but 3 arrows is a bit low right? Well, let's repeat the experiment.

After the first 3 arrows go in, another 3 are set ABOVE them. There is no room for the top 3 arrows to fall below the lower 3. You can't mix them either since the top 3 are standing higher in the quiver.

 6 arrows is more or less the usual arrow compliment for a larp archer, but we can add another 2
as a 3rd layer here, and my quiver is reaching its limit. 



When firing its simply a matter of drawing arrows layer by layer, you start with the top two then the 2nd layer and finally the last 3 arrows. You can't mix them since they stand at different height unless you are wearing your quiver on your back - the arranging is only good if you have a hip quiver.

I can still pack some extra arrows in here, placed upside down in the usual manner and simply fire them first.

0 коментара:

Post a Comment